Christ CLM1000 Standard 사용 설명서 - 페이지 11

{카테고리_이름} Christ CLM1000 Standard에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Christ CLM1000 Standard 12 페이지. Wattmeter

페이지 인쇄

4.2

Display and operation

Display

Control elements

4.3

Measuring principle and accuracy

Measuring principle

Measuring rate

Sampling rate

Open-circuit

recognition

EEPROM-Memory

Measuring error

4.4

Voltage supply

Connection

Supply voltage

Power consumption

4.5

Enviroment and dimensions

Dimensions

Weight

Connection cable

Working temperature

Degree of protection

Protection class

Measuring category

E461755

128*64 Display with varying background lighting

3 membrane buttons

Voltage is measured directly at the load and current is

measured by a precision shunt.

approx. 1 second

approx. 2000 Hz

If I < 0,002 Ampere current and power values are set to zero.

It P < 0,2 Watt power values and current are set to zero.

In this case the power factor is set to 1,00.

The type of resistance is set to ohm-resistance.

All readings are saved even after unplugging

± 0,3 % ± 3 digit from reading at power factor > 0,3

Socket at the adapter, permanent load max. 16 A

100 - 264 V

, 47 - 63 Hz

< 4 VA

ABS plastic casing approx. 200*95*35 [mm] (L*W*H)

approx. 490 g

approx. 1,2 m

0° C - 50° C, dew not permissible

IP 50 according to DIN EN 60529 (with USB-interface IP40)

with seal kit even higher values are permissible

Protection class II (protective insulation) according to DIN EN

61140

CAT II according to DIN EN 61010-1