Dell PowerEdge 1850 설치 매뉴얼 - 페이지 2
{카테고리_이름} Dell PowerEdge 1850에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1850 22 페이지. Dell server quick reference
Dell PowerEdge 1850에 대해서도 마찬가지입니다: 지원 매트릭스 (21 페이지), 보충 설명서 (20 페이지), 정보 업데이트 (24 페이지), 업데이트 매뉴얼 (14 페이지), 업그레이드 매뉴얼 (14 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (31 페이지)
페이지 인쇄
Figure 1. Removing the Filler Plug
7
Angle the RAC card so that the NIC connector inserts through the back-panel RAC card
opening, and then straighten the card. See Figure 2.
8
Install the RAC card:
Hold the card by its edges with the holes in the corners of the card aligned with the four
a
plastic standoffs on the system board. See Figure 2.
Carefully press the back edge of the card onto the RAC card connector on the system
b
board, until the clips on the plastic standoffs snap over that end of the card. See Figure 2.
9
Press down on the front edge of the card until the remaining two plastic standoffs fit over the
card edge.
10
Reinstall the back fan bracket (if removed in step 6).
11
Reinstall the two memory module fans (if removed in step 5).
12
Reinstall the memory cooling shroud (if removed in step 4).
13
Close the system.
14
Reconnect the system and peripherals to their power sources, and turn them on.
filler plug