Dell PowerEdge 4400 랙 설치 - 페이지 30

{카테고리_이름} Dell PowerEdge 4400에 대한 랙 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4400 34 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 4400에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지), 업데이트 매뉴얼 (8 페이지), 정보 업데이트 (8 페이지), 사용자 설명서 (42 페이지), 하드웨어 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (36 페이지), 매뉴얼 (15 페이지)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Attach the input/output (I/O) and power cables to their connectors on the back of

the computer.

For details, see your computer's Installation and Troubleshooting Guide and the

User's Guide.

Secure all of the computer cables to the cable-management arm:

Loosen the rack adapter's thumbscrews that secure the front of the com-

puter to the front vertical rail.

Slide the computer forward to the fully extended position.

Route the cables along the cable-management arm, allowing cable slack at

the hinge positions, and secure the cables to the cable-management arm

with the Velcro straps attached to the cable-management arm (see

Figure 12).

Slide the computer in and out of the rack to verify that the cables are routed

correctly and do not bind, stretch, or pinch with the movement of the cable-

management arm.

NOTE: As you pull the computer out to its furthest extension, the slide assem-

blies will lock in the extended position. To push the computer back into the rack,

press the green locking latch on the side of the slide to release the locks, and

then slide the computer completely into the rack.

Tighten the rack adapter's thumbscrews that you loosened in step 4.

DELL CONFIDENTIAL - Preliminary

9/8/00