Dell PowerEdge 4400 Raf Kurulumu - Sayfa 30

Depolama Dell PowerEdge 4400 için çevrimiçi göz atın veya pdf Raf Kurulumu indirin. Dell PowerEdge 4400 34 sayfaları. Wake-on-lan (wol) support on dell servers
Ayrıca Dell PowerEdge 4400 için: Kurulum Kılavuzu (42 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (28 sayfalar), Raf Kurulumu (37 sayfalar), Güncelleme Kılavuzu (8 sayfalar), Bilgi Güncellemesi (8 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Donanım Kurulum Kılavuzu (40 sayfalar), Kurulum Kılavuzu (36 sayfalar), Manuel (15 sayfalar)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Attach the input/output (I/O) and power cables to their connectors on the back of

the computer.

For details, see your computer's Installation and Troubleshooting Guide and the

User's Guide.

Secure all of the computer cables to the cable-management arm:

Loosen the rack adapter's thumbscrews that secure the front of the com-

puter to the front vertical rail.

Slide the computer forward to the fully extended position.

Route the cables along the cable-management arm, allowing cable slack at

the hinge positions, and secure the cables to the cable-management arm

with the Velcro straps attached to the cable-management arm (see

Figure 12).

Slide the computer in and out of the rack to verify that the cables are routed

correctly and do not bind, stretch, or pinch with the movement of the cable-

management arm.

NOTE: As you pull the computer out to its furthest extension, the slide assem-

blies will lock in the extended position. To push the computer back into the rack,

press the green locking latch on the side of the slide to release the locks, and

then slide the computer completely into the rack.

Tighten the rack adapter's thumbscrews that you loosened in step 4.

DELL CONFIDENTIAL - Preliminary

9/8/00