Dell PowerVault 122T LTO 사용자 설명서 - 페이지 32

{카테고리_이름} Dell PowerVault 122T LTO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 122T LTO 40 페이지. Lto autoloader
Dell PowerVault 122T LTO에 대해서도 마찬가지입니다: 핸드북 (28 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄

Clean Drive

Amber

Illuminated when the tape drive needs to be cleaned. Indicates that 250 tape motion hours have passed since the last cleaning.

The LED turns off when cleaning is successfully completed. (See

Media

Amber

Illuminated if a media related error has occurred. This condition can be the result of dirty read/write heads in the tape drive, or if

Attention

an invalid or damaged cartridge is inserted. The offending cartridge will show an '!' in the cartridge inventory display for the

corresponding slot. Exporting the indicated cartridge will clear the error condition (see

occur on multiple known good cartridges, consider cleaning the tape drive (see

causes these symptoms repeatedly, that cartridge may be defective or invalid.

Error

Red

Illuminated if an unrecoverable tape drive or autoloader error occurs. A corresponding error message appears on the LCD screen

(see

"Autoloader Error

Operator's Panel Control Buttons

The Operator's Panel includes four buttons that provide access to all operations and information menus.

Button

Description

Cancel

Cancels the current menu option and returns to the previous menu level or Home screen.

Selects the previous item or value in the currently displayed menu.

Selects the next item or value in the currently displayed menu.

Enter

Executes the current menu or selects the current option displayed on the LCD screen.

Understanding the Menu Structure

Operator's Panel Menu Structure

Using Cartridges

Before you use the autoloader, make sure you observe these general rules:

Use only DLTtape™IV cartridges. The tape drive in the autoloader can read, but not write DLTtapeIV cartridges that are written in the DLT4000 format.

You can order tape cartridges at www.dell.com/tapebackup. Make sure all cartridges that you want to use for writing have either never been written

to, have been thoroughly degaussed, or have been written to only with the VS80 tape drive in the autoloader or another VS80 or DLT1 tape drive. The

tape drive rejects all other formats. If you want to reuse cartridges that have been formatted with another manufacturer's drive, use a magnetic bulk

eraser or degausser to prepare the cartridges for use with the autoloader. Many common degaussers are not adequate for DLT media. Contact your

support representative for proper degaussing recommendations.

Clean the tape drive when the Clean Drive LED is illuminated, or if there is any other indication that the drive is having trouble reading or writing,

such as if the Media Attention LED is illuminated, or there is an exclamation point (!) in the inventory display. Be sure to use only DLT1 compatible

cleaning cartridges. The tape drive rejects all other types of cleaning cartridges.

NOTE: The autoloader automatically unloads any other cartridge types and any cartridges whose format it cannot read. If you experience

any failures with reused formatted (degaussed) cartridges, the degaussing may not have been sufficient to fully erase the data. If this

happens, use another cartridge (preferably a new, unformatted DLTtapeIV cartridge) before suspecting other system components.

Importing Cartridges

This option forces the autoloader to import a cartridge into a specific empty slot in the carousel. To import tapes into the autoloader:

1. Make sure the write-protect switch is set as desired for each data cartridge (see

the slide-in slot on the front of each cartridge (see

Codes").

"Bar Code

Reader").

Cleaning the Tape

Drive.)

"Exporting

"Cleaning the Tape

"Write-Protecting

Cartridges"). If applicable, insert a bar code label into

Cartridges"). If these symptoms

Drive"). If a particular cartridge