Dell PowerVault 122T LTO 사용자 설명서 - 페이지 35
{카테고리_이름} Dell PowerVault 122T LTO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 122T LTO 40 페이지. Lto autoloader
Dell PowerVault 122T LTO에 대해서도 마찬가지입니다: 핸드북 (28 페이지), 사용자 설명서 (42 페이지)
페이지 인쇄
2. Press + or - until Clean Drive appears on the LCD screen, and then press Enter.
3. If the carousel is full, the LCD screen displays No slot free for transfer. Press Cancel repeatedly until the main menu or Home screen is displayed.
Export a cartridge to make room for the cleaning cartridge (see
4. If the carousel is not full, the autoloader will select the first available slot and prompt you to insert a cleaning cartridge.
5. Insert the cleaning cartridge into the autoloader media door.
6. During the cleaning process, which can take several minutes, the LCD screen displays Drive Cleaning.
NOTE: If the cartridge is not a valid cleaning cartridge, the LCD screen will display Bad clean tape and the cartridge is ejected.
7. When tape drive cleaning is complete, the Clean Drive LED turns off, if previously on, and the autoloader unloads and exports the cleaning cartridge.
Remove the cleaning cartridge, and press Enter when the LCD screen prompts you to do so.
NOTICE: If the Clean Drive or Media Attention LED is illuminated again when you insert another cartridge immediately after cleaning, see
"Troubleshooting."
8. If you had to remove a data cartridge to import the cleaning cartridge, import that data cartridge to its original slot (see
Creating an Inventory of Cartridges
This option builds a new inventory of cartridges in the autoloader. If using a bar code reader, this option also scans the bar code labels on each cartridge in
the carousel (see
"Bar Code
Reader"). To use this option, follow these steps:
1. From the Home screen or main menu, press + or - until Commands appears on the top line of the LCD screen.
2. Press Enter to access the available options.
3. Press + or - until Re-inventory appears on the LCD screen, and then press Enter.
4. The autoloader will then check the drive and each slot for the presence of a tape in order to update the inventory information.
Back to Contents Page
Exporting
Cartridges"), then return to step 1 to clean the tape drive.
"Importing
Cartridges").