Dell PowerVault 211S 교체 지침 매뉴얼 - 페이지 4

{카테고리_이름} Dell PowerVault 211S에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 211S 14 페이지. Dell powervault 20xs storage systems enclosure services expander module installation
Dell PowerVault 211S에 대해서도 마찬가지입니다: 랙 설치 매뉴얼 (26 페이지), 매뉴얼 (9 페이지), 업데이트 (4 페이지), 구성 (2 페이지), 설치 매뉴얼 (48 페이지)

페이지 인쇄

Slowly pull the carrier toward you until it slides free of the drive bay.

Figure 3. Drive Carrier Lock

Figure 4. Drive Carrier Handle

Remove the Power Supplies

NOTICE: In a nonredundant system, note the location of the power

supply and the power-supply blank as you remove them from the

power-supply bays. During the installation procedure (found later in

this document), you must return the power supply and the power-

supply blank to the same power-supply bays from which they were

removed.

NOTE: A redundant storage system has two power supplies. A nonredundant

storage system has one power supply and one power-supply blank. Because a

power supply and a power-supply blank are removed in the same manner, both

components are referred to as a power supply in this procedure.

To remove the power supplies from the storage system, perform the following

steps:

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions