Allied Telesis AT-2701FX 데이터시트
{카테고리_이름} Allied Telesis AT-2701FX에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-2701FX 2 페이지. Pci 32-bit fast ethernet fiber network interface card
Allied Telesis AT-2701FX에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)
Datasheet |
Network Interface Cards
AT -2701FX
PCI 32-bit Fast Ethernet Fiber Network Interface Card
AT -2701FX
100Mbps Fast Ethernet fiber interface card
Choice and Flexibility
Allied Telesis' AT-2701FX is the answer for those
fiber interface cards that support Wake-on-LAN
(WoL) for either PCI 2.1 or PCI 2.2 systems but
not both. Allied Telesis' NICs support WoL
through the PCI 2.2 bus and support PCI 2.1
WoL via external cables. Resistant to signal
degradation, snooping, and interference, the
AT-2701FX is the ideal solution for networks
requiring protection from electrical interference
and hackers.The small footprint—together with
the low-profile option of the AT-2701FX—make
these products a perfect choice for PCs
equipped with small desktop solutions.
Allied Telesis
Advanced Manageability
Allied Telesis' AT-2701FX features a full-line of
card assistant software:
•
AT-Setup reduces Window Driver installation to
a mouse click.This Windows program guides
users through driver installation, updates, and
problem corrections.
•
AT-Stat is an advanced Windows application
that reports network conditions and
performance such as hardware resources,
network statistics, and configuration.
•
The VLAN protocol driver allows network
administrators to configure their VLAN network
fabric at the PC instead of the switch, enabling
transparent movement of systems between
switches.
•
TCP/IP checksum off-loading improves CPU
use by verifying TCP/IP traffic checksums at the
interface card rather than at the host processor,
improving overall system performance for
slower PCs.
•
Packet prioritization enables Windows
applications with Class of Service capabilities to
prioritize out-bound packet streams to these
NICs, a useful feature for video streaming and
VoIP where interruptions are unacceptable.
•
The AT-2701FTX's onboard Managed Boot
Agent (MBA) provides a wide set of industry-
standard boot protocols, including PXE,
NetWare NCP/IPX, IBM's RPL, traditional
DHCP, and BOOTP, supporting both BBS (BIOS
Boot Specification) and non-BBS compliant PCs.
It also includes an extensive set of utilities for
boot ROM configuration, as well as access to
pre-OS and network boot image files.
•
Offering a wide range of connector choices—
ST, SC, or MT-RJ—these cards meet the
requirements of most fiber installations.
Key Features
Management Software
•
VLAN support
•
Link aggregation
•
Failover
Advance Properties
•
PCI 2.2 compliant
•
Wake-on-LAN (WoL)
•
Secured transmissions
•
Advanced installation utility
•
Advanced diagnostics
•
Remote boot (PXE 2.1)
•
TCP/IP checksum off-loading
•
Priority queuing
•
Driver support for popular operating systems
including Sun Solaris
•
Available with SC, ST, or MT-RJ fiber
connections
•
Compliant with the Trade Agreement Act
•
Microsoft certified drivers
•
RoHS compliant
•
Low-profile and standard height brackets
included
•
IPv6
•
Also can be used in PCI-x bus
www.alliedtelesis.com