Allied Telesis AT-2701FX 데이터시트
{카테고리_이름} Allied Telesis AT-2701FX에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-2701FX 2 페이지. Pci 32-bit fast ethernet fiber network interface card
Allied Telesis AT-2701FX에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)
Datasheet |
Network Interface Cards
AT -2701FX
PCI 32-bit Fast Ethernet Fiber Network Interface Card
AT -2701FX
100Mbps Fast Ethernet fiber interface card
Choice and Flexibility
Resistant to signal degradation, snooping, and
interference, the AT-2701FX is the ideal solution
for networks requiring protection from electrical
interference and hackers.The small footprint—
together with the low-profile option of the
AT-2701FX—make these products a perfect
choice for PCs equipped with small desktop
solutions.
Allied Telesis
Advanced Manageability
Allied Telesis' AT-2701FX features a full-line of
card assistant software:
•
AT-Setup reduces Window Driver installation to
a mouse click.This Windows program guides
users through driver installation, updates, and
problem corrections.
•
AT-Stat is an advanced Windows application
that reports network conditions and
performance such as hardware resources,
network statistics, and configuration.
•
The VLAN protocol driver allows network
administrators to configure their VLAN network
fabric at the PC instead of the switch, enabling
transparent movement of systems between
switches.
•
TCP/IP checksum off-loading improves CPU
use by verifying TCP/IP traffic checksums at the
interface card rather than at the host processor,
improving overall system performance for
slower PCs.
•
Packet prioritization enables Windows
applications with Class of Service capabilities to
prioritize out-bound packet streams to these
NICs, a useful feature for video streaming and
VoIP where interruptions are unacceptable.
•
The AT-2701FTX's onboard Managed Boot
Agent (MBA) provides a wide set of industry-
standard boot protocols, including PXE,
NetWare NCP/IPX, IBM's RPL, traditional
DHCP, and BOOTP, supporting both BBS (BIOS
Boot Specification) and non-BBS compliant PCs.
It also includes an extensive set of utilities for
boot ROM configuration, as well as access to
pre-OS and network boot image files.
•
Offering a wide range of connector choices—
ST, SC, or MT-RJ—these cards meet the
requirements of most fiber installations.
Key Features
Management Software
•
VLAN support
•
Link aggregation
•
Failover
Advance Properties
•
PCI 2.2 compliant
•
Wake-on-LAN (WoL) supported (enabled by
default, utility to disable available in firmware)
•
Secured transmissions
•
Advanced installation utility
•
Advanced diagnostics
•
Remote boot (PXE 2.1)
•
TCP/IP checksum off-loading
•
Priority queuing
•
Driver support for popular operating systems
including Sun Solaris
•
Available with SC, ST, or MT-RJ fiber
connections
•
Compliant with the Trade Agreement Act
•
Microsoft certified drivers
•
RoHS compliant
•
Low-profile and standard height brackets
included
•
IPv6
•
Also can be used in PCI-x bus
www.alliedtelesis.com