Dell PowerVault DX6104 사용자 설명서 - 페이지 21

{카테고리_이름} Dell PowerVault DX6104에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault DX6104 39 페이지. Dx object storage platform
Dell PowerVault DX6104에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 시작하기 매뉴얼 (10 페이지), 매뉴얼 (37 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지), 매뉴얼 (24 페이지), 매뉴얼 (23 페이지)

페이지 인쇄

Updating The Dell DX Object Storage Platform

Software

Updates for the Dell DX Object Storage Platform software are periodically made available to correct problems, improve

performance, introduce new features, and support additional hardware. It is recommended that you install the updates

to ensure that the system runs optimally. See the

support/manuals to determine the minimum software versions supported.

DX Cluster Services Node updates may include:

•

System BIOS

•

System firmware

•

System device drivers

•

Operating system

•

DX Cluster Services Node software

NOTE: The DX Storage Node operating system and associated drivers are part of the storage node software image

hosted on the DX Cluster Services Node.

NOTE: Storage Node updates are not delivered by the Update Manager.

Updating The System Software On The CSN

With the Version 3.1 software release, Dell is releasing an Update Manager (UM) tool. The UM tool deploys system

updates on the system. The UM is an rpm installed on the system and is part of the DX appliance system software.

Updates are deployed as a .tar.gz file called the payload. The UM includes all of the updates listed above for the DX

Cluster Services Node. At this time, the UM does not provide updates for Hard Drive (HDD) firmware.

Downloading The Update Manager Payload

You can download the Update Manager payload for your DX system from dell.com/support/downloads. The Update

Manager payload is located on the appropriate download page under the IDM category, and is a compressed archive

containing all the drivers, firmware and software needed for the CSN. Download the file and copy it to the system. For

information on executing the update, see

NOTE: To ensure that you have the complete and uncorrupted download, compute an MD5 checksum on the

download, and compare it with the MD5 checksum found on dell.com/support.

Executing Updates

NOTE: Ensure that you have copied the Update Manager payload (*.tar.gz) to the /root directory.

Run the following command as root to execute the update:

/opt/dell/dellAUM/dellaum -noappdb –o UPDATEPACKAGE=/root/DX-CSN-UM-3.0.0.tar.gz

Dell DX Object Storage Platform Interoperability Guide at dell.com/

Executing

Updates.