Dell PowerVault DX6104 사용자 설명서 - 페이지 22

{카테고리_이름} Dell PowerVault DX6104에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault DX6104 39 페이지. Dx object storage platform
Dell PowerVault DX6104에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 시작하기 매뉴얼 (10 페이지), 매뉴얼 (37 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지), 매뉴얼 (24 페이지), 매뉴얼 (23 페이지)

페이지 인쇄

NOTE: In the above command, <DX-CSN-UM-3.0.0.tar.gz> is an example of the name of an update

package. The name of the package will change as the version number changes.

The progress information is displayed on the console as the update is executed.

After all updates are complete, a message is displayed on the console if an updated component requires a restart.

NOTE: The system does not restart automatically, although the system is unusable until the restart.

Receiving System Software Update Notifications

Dell technical update subscriptions allow you to receive critical product alerts, updates to files, drivers, and utilities for

your system.

To register for these notifications:

Go to dell.com/support/downloads.

Click on the Technical Subscriptions link under the Drivers and Downloads section.

If a component installed on your system is newer than the component contained within the payload, the UM halts

and a message similar to the following is displayed:

Update Manager has determined that one or more component(s) in the

appliance require a downgrade. Run the Update Manager with one of the

following arguments:

-forcedowngrade" or "-skipdowngrade" to continue.

In this case, download the latest UM payload from dell.com/support before continuing. For more information on

managing downgrade scenarios, see

Downgrading A Payload

If a new payload is not available on the Dell support site, or you want to proceed after a downgrade is halted, the UM

can be re-run with one of the following options:

•

-skipdowngrade — The UM ignores the newer component and executes the upgrade.

•

-forcedowngrade — The UM attempts to downgrade the component.

CAUTION: All components do not support downgrades. Use -forcedowngrade only under the guidance of Dell

Support.

Troubleshooting Update Failures

If an update fails, the system may be in an unusable state. For information on which component update(s) failed, see

the /var/log/update.log. In most cases, running the update once again recovers the system from this state.

NOTE: The logs are located at /var/log/dellaum.log.

If the error persists, see

Contacting

Repairing The Installed System Software

You can use the UM to repair the installed system software when you replace hardware, or if the Compatibility Manager

(CM) reports a CRITICAL status. To repair the system software, execute the UM with the following option as root:

/opt/dell/dellAUM/dellaum -noappdb –updateinstalledstack

Downgrading A

Payload.

Dell.