EarthLinked PHXTI Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} EarthLinked PHXTI Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthLinked PHXTI Series 12 페이지. Pool heat exchangers

The heat exchanger water connections are nominal 2 inch PVC. Plumb these connections first, as

follows:

1. With abrasive cloth (Oatey #31411 or equivalent), roughen the ID surfaces of the female

connectors on the heat exchanger and the OD surfaces on the water supply and return PVC

pipes.

2. Clean the same surfaces in item 1 with PVC Cleaner (Oatey #30782 or equivalent) and

allow to dry.

3. Apply PVC Cement (Oatey #30863 or equivalent) to the cleaned areas in step 2.

4. Be sure the correct water pipe is aligned with the correct connection on the heat exchanger.

5. Press one pipe at a time into the appropriate water fitting on the heat exchanger and

maintain push pressure for 30 seconds.

PHXTI-IM (05/13)

Figure 2. Typical Pool Installation Piping

Page 5