EarthLinked PHXTI Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} EarthLinked PHXTI Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthLinked PHXTI Series 12 페이지. Pool heat exchangers

B. Refrigerant Connections

The refrigerant connections are shown in Figure 3. Each connection is 5/8 inch OD copper tube.

The refrigerant line connections are brazed as follows:

1. Clean and deburr the copper stub outs and the field supplied fittings that will make the

connections from the refrigeration system.

2. Use 15% silver brazing alloy to seal the refrigeration connections.

3. Make provisions to use the nitrogen brazing technique as described below to braze the

refrigerant joints.

4. Before brazing the refrigerant joints, protect the SWAGLOK

wrapping each joint with a wet cloth, and further protect it from direct torch flame with an

inflammable shield as shown in Figures 4, 5 and 6.

PHXTI-IM (05/13)

fittings illustrated in Figure 3 by

Page 7