Dell PowerVault MD1200 기술 매뉴얼북 - 페이지 17

{카테고리_이름} Dell PowerVault MD1200에 대한 기술 매뉴얼북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD1200 23 페이지. Dell powervault storage enclosure setting up
Dell PowerVault MD1200에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지)

페이지 인쇄

• In a split-mode configuration the enclosure is connected to either two host controllers or two ports on

a single host controller. The enclosure can be connected to two different host servers in a split mode

configuration. Each server sees the enclosure as an independent device with half of the total enclosure

slot capacity. Table 10 lists the drives that are controlled by each enclosure management module

(EMM) in a split-mode configuration. See Figure 11 for a cabling diagram of a split-mode configuration.

The operating mode is selected using the enclosure mode switch on the front panel of the enclosure.

NOTE: The enclosure mode switch must be set to either unified mode or split mode before the

enclosure is turned on. Changing the configuration mode after turning on the enclosure has no effect on

the enclosure configuration until the enclosure is rebooted.

NOTE: Clustering is not supported on PowerVault™ MD1200 and PowerVault™ M1220 enclosures.

Figure 9.

EMM Cabling Diagram in Unified Mode (Single Path)

** Available in Q3 2010