Dell PowerVault MD3000i 지원 참고 사항 - 페이지 3

{카테고리_이름} Dell PowerVault MD3000i에 대한 지원 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3000i 22 페이지. Configuration for vmware esx server software
Dell PowerVault MD3000i에 대해서도 마찬가지입니다: 튜닝 매뉴얼 (32 페이지), 업그레이드 매뉴얼 (28 페이지), 사용자 설명서 (46 페이지), 교체 매뉴얼 (4 페이지), 구성 매뉴얼 (10 페이지)

페이지 인쇄

Rules

IPv6 is supported with homogenous Microsoft Windows

2008 environments only.

IPv6 should be disabled on Linux targets that do not

support it to prevent login failure.

If using IPv6, all hosts connected to the MD3000i should

support IPv6 with the MD3000i

Only one type of iSCSI initiator can be used in a host

system. For example, if the Broadcom NetXtreme II 5709

iSCSI Initiator is used, then all the iSCSI initiators in the

system must be Broadcom NetXtreme II 5709 iSCSI

Initiators and the software initiator must not be used with

other NICs in the system.

Table 2. Environment

Rules

A server can connect to a maximum of three MD3000i

storage arrays.

A maximum of 16 physical host servers can be attached to

the storage array.

A maximum of 32 virtual host servers can be attached to the

storage array (note: running the iSCSI initiator at the

hypervisor level counts as a single host even if the storage is

shared by all guest OSes)

The MD3000i supports up to eight nodes in Microsoft

Windows Server

2003 Cluster environment and up to

sixteen nodes in Microsoft Windows Server 2008 Cluster

environment.

Connecting an MD3000i and an MD3000 to the same host

is not supported.

Table 3.

Considerations

Dell PowerVault Data MD3000i Support Matrix

First

Second

Gen.

√

First

Second

Gen.

√