Dell PowerVault MD3000i Nota de apoio - Página 3

Procurar online ou descarregar pdf Nota de apoio para Armazenamento Dell PowerVault MD3000i. Dell PowerVault MD3000i 22 páginas. Configuration for vmware esx server software
Também para Dell PowerVault MD3000i: Manual de afinação (32 páginas), Upgrade Manual (28 páginas), Manual do utilizador (46 páginas), Manual de substituição (4 páginas), Manual de configuração (10 páginas)

Rules

IPv6 is supported with homogenous Microsoft Windows

2008 environments only.

IPv6 should be disabled on Linux targets that do not

support it to prevent login failure.

If using IPv6, all hosts connected to the MD3000i should

support IPv6 with the MD3000i

Only one type of iSCSI initiator can be used in a host

system. For example, if the Broadcom NetXtreme II 5709

iSCSI Initiator is used, then all the iSCSI initiators in the

system must be Broadcom NetXtreme II 5709 iSCSI

Initiators and the software initiator must not be used with

other NICs in the system.

Table 2. Environment

Rules

A server can connect to a maximum of three MD3000i

storage arrays.

A maximum of 16 physical host servers can be attached to

the storage array.

A maximum of 32 virtual host servers can be attached to the

storage array (note: running the iSCSI initiator at the

hypervisor level counts as a single host even if the storage is

shared by all guest OSes)

The MD3000i supports up to eight nodes in Microsoft

Windows Server

2003 Cluster environment and up to

sixteen nodes in Microsoft Windows Server 2008 Cluster

environment.

Connecting an MD3000i and an MD3000 to the same host

is not supported.

Table 3.

Considerations

Dell PowerVault Data MD3000i Support Matrix

First

Second

Gen.

√

First

Second

Gen.

√