Dell PowerVault MD3060e Series 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 40 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (35 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (48 페이지), 설정 (2 페이지)

페이지 인쇄
Dell PowerVault MD3060e Series 소유자 매뉴얼
Item
Indicator, Button, or
Connector
1
SAS IN port 0
2
SAS IN port 1
3
Serial debug port
4
Telnet port
5
SAS OUT port
6
Diagnostic LED
7
Module power indicator
8
Service action required
indicator (system)
9
Service action allowed
indicator

Storage Enclosure Thermal Shutdown

The system automatically shuts down when system temperature exceeds the safe threshold.
Temperature threshold values determine the temperature at which shutdown occurs. These thresholds
cannot be changed. The system will attempt to auto-restart after returning to normal temperatures.

Related Documentation

WARNING: See the safety and regulatory information that shipped with your system. Warranty
information may be included within this document or as a separate document.
Icon
Description
For SAS connection of the storage enclosure to a server,
RAID controller, or another storage enclosure.
For SAS connection of the storage enclosure to a server,
RAID controller, or another storage enclosure.
Dell support only.
Dell support only.
For connection to additional storage enclosures.
The numeric display consists of two seven-segment LEDs
that provide information about enclosure identification
and diagnostics.
The module power indicator lights green when module
power is on.
The Service action required indicator lights amber when
there is a fault in one of the components in the system.
CAUTION: Remove the expansion module from the
system only if the Service action allowed indicator
lights blue. Removing the expansion module from
the system when the Service action allowed
indicator is off may damage the system.
NOTE: The Service action allowed indicator LED is
not used in server attached configurations.
Blue
Off
Indicates that you can safely
remove the expansion module
from the system.
Indicates that you cannot remove
the expansion module from the
system.
13