Dell PowerVault MD3060e Series 관리자 매뉴얼 - 페이지 17

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 48 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (35 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 소유자 매뉴얼 (40 페이지), 설정 (2 페이지)

Identifying EMMs

To identify the attached EMMs to a specific adapter, run the following command:

secli list emms -a=<(SASAddress | AdapterIndex)>

For EMMs:

Notate the Enclosure Slot Index and the WWN (worldwide name) columns. These values are required for

neccesary command parameters.

Identifying drawers

To verify the status and number of drives in the drawers of an enclosure, run the following command:

secli list drawers -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

When identifying drives, there are other optional parameters that you can include to narrow the scope of

the drives to obtain information from. You can identify drives from the adapter (all down-chain

enclosures attached to a specified HBA), all the drives in a specific enclosure, or all the drives in a

specified drawer in a specified enclosure. To get information about all the drives visible to an adapter, run

the following command:

To get information about all the drives visible to an adapter:

secli list drives -a=<(SASAddress | AdapterIndex)>

For all the drives visible to an adapter: