Dell PowerVault MD3060e Series Handleiding voor beheerders - Pagina 17

Blader online of download pdf Handleiding voor beheerders voor {categorie_naam} Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 48 pagina's. Storage enclosure
Ook voor Dell PowerVault MD3060e Series: Handleiding voor hardware en software (25 pagina's), Installatiehandleiding (11 pagina's), Aan de slag handleiding (10 pagina's), Informatie-update (8 pagina's), Instructies voor installatie van het rek (2 pagina's), Instellen (2 pagina's), Uitrolhandleiding (24 pagina's), Handleiding voor beheerders (35 pagina's), Aan de slag handleiding (10 pagina's), Uitrolhandleiding (24 pagina's), Gebruikershandleiding (40 pagina's), Instellen (2 pagina's)

Identifying EMMs

To identify the attached EMMs to a specific adapter, run the following command:

secli list emms -a=<(SASAddress | AdapterIndex)>

For EMMs:

Notate the Enclosure Slot Index and the WWN (worldwide name) columns. These values are required for

neccesary command parameters.

Identifying drawers

To verify the status and number of drives in the drawers of an enclosure, run the following command:

secli list drawers -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

When identifying drives, there are other optional parameters that you can include to narrow the scope of

the drives to obtain information from. You can identify drives from the adapter (all down-chain

enclosures attached to a specified HBA), all the drives in a specific enclosure, or all the drives in a

specified drawer in a specified enclosure. To get information about all the drives visible to an adapter, run

the following command:

To get information about all the drives visible to an adapter:

secli list drives -a=<(SASAddress | AdapterIndex)>

For all the drives visible to an adapter: