Dell PowerVault MD3060e Series 관리자 매뉴얼 - 페이지 34

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 48 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (35 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 소유자 매뉴얼 (40 페이지), 설정 (2 페이지)

페이지 인쇄
Dell PowerVault MD3060e Series 관리자 매뉴얼
Parameter
-event

Update commands

Update drive firmware

Description
This command updates the firmware version of the specified drives by using the provided firmware file.
This command also verifies the integrity of the firmware file before applying the firmware.
Command syntax
secli (update drive | updatedrive | ud) (-a=<(SAS WWID | AdapterIndex)> [-
enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] [-d=<(WWN | EnclosureSlotIndex |
DrawerSlotIndex | Serial Number | Drive OS Path)>] (-file=<FW.FilePath> [-
force] | -directory=<FW.DirectoryPath>) [-show] [-multi]
w=<DrawerIndex>] [-d=<(WWN | EnclosureSlotIndex | DrawerSlotIndex | Serial
Number | Drive OS Path)>] (-file=<FW.FilePath>[-force] | -
directory=<FW.DirectoryPath>) [-show] [-multi]
| DrawerSlotIndex | Serial Number | Drive OS Path)> (-file=<FW.FilePath>[-
force] | -directory=<FW.DirectoryPath>) [-show] [-multi]
Parameters
Table 24. Update drive firmware
Parameter
-a
-d
-enc
-w
-file
34
Description
Display logs of the given event severity type. This could be either of the
following: INFO, CRITICAL, ERROR, WARN. Logs are printed irrespective of the
severity level, if this argument is not provided.
| -enc=<WWN> [-
| -d=<(WWN | EnclosureSlotIndex
| [-h])
Description
Specify the adapter used for the command. This is
either SAS WWID or AdapterIndex.
Specify the HDD used for the command. This can
be any of the following:
•
WWN—Can be used anytime.
•
Serial Number—Can be used anytime.
•
Drive OS path—Can be used anytime.
•
Enclosure Slot Index—Use if drawer argument
is not used for the command.
•
Drawer Slot Index (Index of the drive in the
specific drawer)— Use if drawer argument is
used for the command.
Specify the enclosure used for the command. This
is either WWN or EnclIndex.
Specify the drawer index used for the command.
Specify the file at the given path used for the
command.