Dell PowerVault MD3200 Series 백서 - 페이지 13

{카테고리_이름} Dell PowerVault MD3200 Series에 대한 백서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200 Series 22 페이지. Storage arrays
Dell PowerVault MD3200 Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 배포 매뉴얼 (38 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (17 페이지), 기술 매뉴얼북 (40 페이지), 배포 매뉴얼 (38 페이지), 배포 매뉴얼 (38 페이지)

Planning for Hyper-V: PowerVault™ MD3200 and MD3200i Series of Arrays

planning the network connection to the Dell PowerVault MD3200i storage array, make sure that the

cabling looks similar to Error! Reference source not found. (this configuration uses maximum

performance by using all four ports per controller; however, a minimum of two connections is

recommended).

Dell PowerVault MD3200i Storage Array Network Configuration

Figure 4.

The Module Disk Storage Manager comes with the device-specific module (DSM) for Microsoft multipath

I/O (MPIO). MPIO provides load-balancing between the two ports of one RAID controller module. For

best performance, make sure that load-balancing is enabled and active. Load-balancing lets you use up

to 4 Gb/s for each virtual disk on the Dell PowerVault MD3200i storage array.

MD3200i Load-Balance Policies

You can change the load-balance policy by using the Windows 2008 Disk Management option. From the

server desktop, right-click the My Computer icon, and select Manage to open the Computer

Management dialog. Click Disk Management to show the list of virtual disks that are attached to the

server. Right-click the virtual disk on which you would like to set the load-balance policy, and select

Properties. From the MPIO tab, select the load-balance policy that you want to set for this virtual disk

You can choose one of these load-balance policies to optimize I/O performance.

Round Robin with Subset

The round-robin with subset I/O load-balance policy routes I/O requests, in rotation, to each available

data path to the RAID controller module that owns the virtual disks. This policy treats all data paths to

the RAID controller module that owns the virtual disk equally for I/O activity. Data paths to the

Page 11