Dell PowerVault MD3200 Series Beyaz Kitap - Sayfa 13

Depolama Dell PowerVault MD3200 Series için çevrimiçi göz atın veya pdf Beyaz Kitap indirin. Dell PowerVault MD3200 Series 22 sayfaları. Storage arrays
Ayrıca Dell PowerVault MD3200 Series için: Güncelleme Kılavuzu (32 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Destek Matrisi (12 sayfalar), Kurulum Kılavuzu (18 sayfalar), Dağıtım Kılavuzu (38 sayfalar), Bilgi Güncellemesi (1 sayfalar), Destek Matrisi (17 sayfalar), Teknik El Kitabı (40 sayfalar), Dağıtım Kılavuzu (38 sayfalar), Dağıtım Kılavuzu (38 sayfalar)

Planning for Hyper-V: PowerVault™ MD3200 and MD3200i Series of Arrays

planning the network connection to the Dell PowerVault MD3200i storage array, make sure that the

cabling looks similar to Error! Reference source not found. (this configuration uses maximum

performance by using all four ports per controller; however, a minimum of two connections is

recommended).

Dell PowerVault MD3200i Storage Array Network Configuration

Figure 4.

The Module Disk Storage Manager comes with the device-specific module (DSM) for Microsoft multipath

I/O (MPIO). MPIO provides load-balancing between the two ports of one RAID controller module. For

best performance, make sure that load-balancing is enabled and active. Load-balancing lets you use up

to 4 Gb/s for each virtual disk on the Dell PowerVault MD3200i storage array.

MD3200i Load-Balance Policies

You can change the load-balance policy by using the Windows 2008 Disk Management option. From the

server desktop, right-click the My Computer icon, and select Manage to open the Computer

Management dialog. Click Disk Management to show the list of virtual disks that are attached to the

server. Right-click the virtual disk on which you would like to set the load-balance policy, and select

Properties. From the MPIO tab, select the load-balance policy that you want to set for this virtual disk

You can choose one of these load-balance policies to optimize I/O performance.

Round Robin with Subset

The round-robin with subset I/O load-balance policy routes I/O requests, in rotation, to each available

data path to the RAID controller module that owns the virtual disks. This policy treats all data paths to

the RAID controller module that owns the virtual disk equally for I/O activity. Data paths to the

Page 11