3 Day Blinds ARCH 조립/설치 지침 - 페이지 3

{카테고리_이름} 3 Day Blinds ARCH에 대한 조립/설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3 Day Blinds ARCH 8 페이지.

The wood arch is intended to be installed with the slats angled down

toward the window. This provides for maximum light control and will

keep the sun's rays from damaging furniture and carpet. You will be

unable to install a stand alone arch with the slats angled in the

opposite direction.

WARNING: 3 Day Blinds recommends that you follow these

instructions carefully. If you fail to attach the arch to a window sill

or wood blind support brackets, the arch could be dislodged and

fall from the window. This could result in damage to property. It

could also seriously harm people and/or animals.

arch aSSeMBLY

Page 2

• Remove the arch components

from their protective wrapping.

DO NOT remove the shims

located in the grooves.

• Attach the vertical supports to

the bottom rail using a Phillips

screwdriver and the #8 x

screws. The vertical supports

are numbered starting at 1 and

correspond to the same number

written inside the groove on the

bottom rail. Be careful not to

over-tighten the screws, as this

may crack the vertical supports.

Make sure the screws are flush

with the face of the bottom rail

and all vertical supports are

facing the same direction.