Dell PowerVault MD3660f Series 구성 매뉴얼 - 페이지 14

{카테고리_이름} Dell PowerVault MD3660f Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3660f Series 17 페이지. Storage arrays
Dell PowerVault MD3660f Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (26 페이지), 배포 매뉴얼 (24 페이지)

Figure 7. Four Host Servers With Single-Port HBAs Connected to a Dual-Controller (Duplex) Storage Array Using Cluster Cabling

Figure 7 shows a four-cluster node connected to two RAID controller modules. Since each cluster node has redundant

paths, loss of a single path still allows access to the storage array through the alternate path.

SAN-Attached Cabling

SAN-attached cabling configurations provide the highest level of redundancy and alternate-path connectivity between

the host server and storage array. A SAN configuration using a Fibre Channel compatible switch fabric allows you to

establish multiple redundant paths to data on the storage array.

NOTE: A SAN configuration using a supported Fibre Channel switch hardware is required if the Remote Replication

premium feature is activated on the storage array. Remote Replication is not supported in a direct-attached

configuration. For specific cabling requirements for Remote Replication, see Remote Replication Cabling Example.

SAN-Attached Cabling Example

The following figure shows a three-server, mixed HBA cabling configuration that uses two separate switch fabrics to

establish multiple paths to the storage array. Port-to-port connections in each switch fabric/zone are detailed in the text

boxes.