Dell PowerVault NX1950 설치 및 문제 해결 매뉴얼 - 페이지 18

{카테고리_이름} Dell PowerVault NX1950에 대한 설치 및 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault NX1950 48 페이지. For vmware esx server software
Dell PowerVault NX1950에 대해서도 마찬가지입니다: 배포 매뉴얼 (34 페이지), 중요 정보 매뉴얼 (26 페이지), 시작하기 (49 페이지), 배포 매뉴얼 (38 페이지), 업그레이드 매뉴얼 (18 페이지), 참조 매뉴얼 (4 페이지), 설정 (2 페이지), 사용 (2 페이지), 구성 매뉴얼 (11 페이지)

페이지 인쇄

Figure 2-3. Example of Cabling a PowerVault NX1950 Gateway Cluster Solution

PowerVault NX1950 storage system

NIC port A to Gb Ethernet switch

(optional) for MSCS heartbeat

NIC port B to Gb Ethernet switch

(optional)

On-board Gb1 and Gb2 to Gigabit

Ethernet switch(es)

PowerVault NX1950 Initial Configuration

Tasks Wizard

It is recommended that you use the PowerVault NX1950 Initial

Configuration Tasks wizard to configure the PowerVault NX1950 storage

system and to access MSCS. Figure 2-4 illustrates the wizard. The

PowerVault NX1950 Initial Configuration Tasks wizard helps you to perform

various tasks to configure the resources required by a cluster.

Before setting up the cluster, you must perform step 1 to step 4 in Table 2-1.

NOTE:

The Customize this system section in the wizard is specific to cluster setup.

The PowerVault NX1950 cluster solution is supported only with the Microsoft

Windows

Setting Up Your Cluster

Unified Data Storage Server 2003, Enterprise x64 Edition.

1 2

Port 2 on HBA to SAN

Port 1 on HBA to SAN

DRAC port to Ethernet switch for

lights-out management