Dell PowerVault RD1000 사용자 설명서 - 페이지 21

{카테고리_이름} Dell PowerVault RD1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault RD1000 29 페이지. Usb 3.0 performance considerations
Dell PowerVault RD1000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 시작하기 매뉴얼 (20 페이지), 중요 정보 매뉴얼 (7 페이지), 보충 설명서 (8 페이지), 시작하기 매뉴얼 (4 페이지), 시작하기 매뉴얼 (35 페이지)

Dell PowerVault RD1000 사용자 설명서
b) Make sure your unit is connected to a USB 2.0 port instead of a USB 1.1 port. For best
performance, connect directly to a USB 2.0 root hub on the PC and not an external hub.
1
AC Power Adapter
2
USB 2.0 Connector (black)
3
USB 3.0 Connector (blue)
The USB bus shares bandwidth between all USB devices connected to the systems, including the
RD1000 External unit. The use of cameras, flash memory devices, etc. on the USB bus may decrease
performance of the device. Remove extra devices if they are not necessary.
If running Windows 2000 see section
additional information.

Linux Users

Systems running Linux may see reduced performance when doing backups on RD1000 cartridges
configured for FAT32. For best performance, configure the file system on the RD1000 cartridges for
ext2 or ext3. See section

Write Error

If the backup application reports a write error, follow these steps:
1. Verify that the write protect switch on the cartridge is set to the "unlock" position.
2. Check the cartridge indicator on the front of the cartridge. If this indicator is amber, the
cartridge is not working properly. This may be due to severe damage to the cartridge. Run the
RD1000 utility software to obtain more information about the failure.
3. Replace the cartridge if the error persists.
"Slow Performance with RD1000 External and Windows
"RD1000 Cartridge File System
Considerations" in the appendix.
2000" for