Dell PowerVault TL2000 시작하기 - 페이지 24

{카테고리_이름} Dell PowerVault TL2000에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault TL2000 38 페이지. Tape library
Dell PowerVault TL2000에 대해서도 마찬가지입니다: 릴리스 정보 (3 페이지), 자주 묻는 질문 (26 페이지), 빠른 시작 매뉴얼 (7 페이지), 소프트웨어 설명서 (16 페이지), 구성 매뉴얼 (22 페이지), 중요 정보 매뉴얼 (10 페이지), 사용자 설명서 부록 (2 페이지), 시작하기 매뉴얼 (3 페이지), 첨부 파일 지침 (17 페이지), 브로셔 (4 페이지), 사용자 설명서 (20 페이지)

10. Power cycle the library to initialize your configuration.

Logging on to the Web User Interface

To complete the configuration of your library using the Web User Interface, follow

the steps below.

1. On your host computer, open Internet Explorer.

2. In the browser address field, enter your library's IP Address.

3. When the login screen appears, enter the following:

Figure 1-16. Log in screen on the Web User Interface

If you have a 2U or 4U library with only one drive, or do not wish to partition

your library, proceed to the next section, "Choosing Library Settings" on page 1-15.

One cartridge magazine cannot be assigned to two logical libraries. If you partition

a multi-drive library, each of the magazines must be assigned to a logical library

on a magazine boundary. The entire magazine must be part of one logical library

only.

Note: If you have a 2U library with two drives, you have the capability to have

1-14

Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

a. Press the SELECT button to highlight the Gateway field.

b. Press the UP or DOWN button to select the digit(s) in your library's

Gateway address.

c. Press the SELECT button to highlight the digit(s) in your library's Gateway

address.

d. After entering the final digits in your Gateway address, press the DOWN

button and select one of the following:

v Save - to save your network settings.

v Cancel - to cancel all of your entries and leave the settings as they were.

7. Press the SELECT button to return to the Configure menu.

8. Press the CANCEL button to return to the Main menu.

9. Press the CANCEL button to return to the home screen.

v Username: admin

v Password: secure

If you have a library with only one drive, proceed to the section, "Choosing

Library Settings" on page 1-15

two logical libraries.