Dell PowerVault TL4000 자주 묻는 질문 - 페이지 11

{카테고리_이름} Dell PowerVault TL4000에 대한 자주 묻는 질문을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault TL4000 26 페이지. Tape library
Dell PowerVault TL4000에 대해서도 마찬가지입니다: 릴리스 정보 (3 페이지), 시작하기 (38 페이지), 빠른 시작 매뉴얼 (7 페이지), 소프트웨어 설명서 (16 페이지), 구성 매뉴얼 (22 페이지), 중요 정보 매뉴얼 (10 페이지), 사용자 설명서 부록 (2 페이지), 시작하기 매뉴얼 (3 페이지), 첨부 파일 지침 (17 페이지), 브로셔 (4 페이지), 사용자 설명서 (20 페이지)

Dell PowerVault TL4000 자주 묻는 질문
Replace the EKM 2.1 files at C:\ekm\gui with the files from the
f
original EKM that you backed up in step c.
Restart the EKM 2.1 and record the IP address.
g
If required, update the EKM IP address in the library configuration. If
h
this is a primary or redundant EKM configuration, perform step 6 to
step 10 in "How do I create a redundant EKM based on a primary
EKM server?" on page 11 to complete the configuration.
Can an EKM server running EKM 2.0 and an EKM server running EKM 2.1
be synchronized?
Yes. Ensure that you perform the procedure in "How do I synchronize the
redundant EKM anytime configuration changes (like adding keys, adding key
groups, adding drives, and so on) are made to the primary EKM?" on page 12.

How do I create a redundant EKM based on a primary EKM server?

1 Install the primary EKM server through the install CD. Use the GUI to
configure the EKM and make note of the group name, number of keys,
key store name, and key store password.
2 Install the EKM application for the redundant EKM through the install
CD on a different platform. Use the GUI to configure the EKM.
The redundant EKM settings must be the same as the original EKM.
The following items must match: group name, number of keys,
key store name, and key store password.
3 Stop the redundant EKM (second EKM installed).
4 Collect the backup files from the primary EKM located at C:\ekm\backup
(default directory).
5 Replace the redundant EKM files at C:\ekm\gui with the files from the
primary EKM (files from step 4).
6 Restart the redundant EKM and note the IP address of the redundant EKM.
7 Launch the command line interface in the redundant EKM
(C:\ekm\client\startclient.bat).
Dell Encryption Key Manager and Library Managed Encryption
11