Dell PowerVault TL4000 자주 묻는 질문 - 페이지 12

{카테고리_이름} Dell PowerVault TL4000에 대한 자주 묻는 질문을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault TL4000 26 페이지. Tape library
Dell PowerVault TL4000에 대해서도 마찬가지입니다: 릴리스 정보 (3 페이지), 시작하기 (38 페이지), 빠른 시작 매뉴얼 (7 페이지), 소프트웨어 설명서 (16 페이지), 구성 매뉴얼 (22 페이지), 중요 정보 매뉴얼 (10 페이지), 사용자 설명서 부록 (2 페이지), 시작하기 매뉴얼 (3 페이지), 첨부 파일 지침 (17 페이지), 브로셔 (4 페이지), 사용자 설명서 (20 페이지)

8 Log in into the EKM by typing (login ekmuser: EKMAdmin

ekmpassword: changeMe) in the prompt.

9 Locate the SSL port in the redundant EKM by typing status.

10 Type the command: sync -all -ipaddr <redundant EKM

IP address>:<redundant SSL port> -rewrite.

How do I synchronize the redundant EKM anytime configuration

changes (like adding keys, adding key groups, adding drives, and so on)

are made to the primary EKM?

1 Stop the redundant EKM.

2 Collect the backup files from the primary EKM located at C:\ekm\backup

(default directory).

3 Replace the redundant EKM files at C:\ekm\gui with the files from

the primary EKM (files from step 2).

4 Restart the redundant EKM and note the IP address of the redundant EKM.

5 Launch the command line interface in the redundant EKM

(C:\ekm\client\startclient.bat).

6 Log in into the EKM by typing (login ekmuser: EKMAdmin

ekmpassword: changeMe) in the prompt.

7 Locate the SSL port in the redundant EKM by typing status.

8 Type the command: sync -all -ipaddr <redundant EKM

IP address>:<redundant SSL port> -rewrite.

The library-managed encryption setup is not clear as to what port is to be used

in the configuration. The library-managed encryption configuration requires an

IP address on the TCP port to access the EKM server. This information can be

located on the Health Monitor page of the EKM GUI.

EKM should be configured to run as a Windows or Linux-based service to

ensure that it restarts automatically if the server reboots.

Dell Encryption Key Manager and Library Managed Encryption