Dell PS6000 하드웨어 유지 관리 - 페이지 42

{카테고리_이름} Dell PS6000에 대한 하드웨어 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PS6000 50 페이지. Storage arrays
Dell PS6000에 대해서도 마찬가지입니다: 하드웨어 매뉴얼 (50 페이지), 개요 (7 페이지), 빠른 참조 매뉴얼 (2 페이지)

페이지 인쇄
Dell PS6000 하드웨어 유지 관리
PS6000 Hardware Maintenance
To install a power supply and cooling module in an array:
1. Attach an electrostatic wrist strap, as described in Using an Electrostatic Wrist
Strap on page 1-5.
2. See Figure 4-2. Squeeze the latches inward (
rotate the handle upward (
3. Hold the handle and slide the module into the slot, until you feel resistance.
See Figure 4-3.
Figure 4-4: Installing a Power Supply and Cooling Module
4. Rotate the handle downward until it engages with the latches and the module
is completely inserted. See Figure 4-2.
5. Attach the power cable to the module. If your PS Series array was shipped
with a power cable, use this cable to meet safety requirements.
6. Use the cable strain relief to secure the power cable to the array, as shown in
Figure 4-5.
4–4
Maintaining Power Supply Modules
) to release the handle and then
).