Dell PS6000 Hardware Maintenance - Page 42

Browse online or download pdf Hardware Maintenance for Storage Dell PS6000. Dell PS6000 50 pages. Storage arrays
Also for Dell PS6000: Hardware Manual (50 pages), Overview (7 pages), Quick Reference Manual (2 pages)

Print Page
Dell PS6000 Hardware Maintenance
PS6000 Hardware Maintenance
To install a power supply and cooling module in an array:
1. Attach an electrostatic wrist strap, as described in Using an Electrostatic Wrist
Strap on page 1-5.
2. See Figure 4-2. Squeeze the latches inward (
rotate the handle upward (
3. Hold the handle and slide the module into the slot, until you feel resistance.
See Figure 4-3.
Figure 4-4: Installing a Power Supply and Cooling Module
4. Rotate the handle downward until it engages with the latches and the module
is completely inserted. See Figure 4-2.
5. Attach the power cable to the module. If your PS Series array was shipped
with a power cable, use this cable to meet safety requirements.
6. Use the cable strain relief to secure the power cable to the array, as shown in
Figure 4-5.
4–4
Maintaining Power Supply Modules
) to release the handle and then
).