Dell Storage Center SC220 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Dell Storage Center SC220에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Storage Center SC220 36 페이지. Storage enclosures
Dell Storage Center SC220에 대해서도 마찬가지입니다: 시작하기 (14 페이지), 소유자 매뉴얼 (27 페이지)

페이지 인쇄

Phone Home

Perform a Phone Home in the Storage Center System Manager to send the current system

information to Dell Technical Support Services. The System Manager displays the Phone

Home status and indicates when the process is completed successfully.

1 From the Storage Management menu, select System→ Phone Home→

Phone Home. The System Manager displays previous Phone Home events.

2 Click Phone Home Now. The Phone Home wizard appears.

3 Click OK. The Phone Home wizard displays the status of each item that is being sent.

Items that are being sent will have a status of In Progress. Once completed, this status

will change to Success if the Phone Home has completed successfully, or Failure if the

Phone Home could not be completed.

4 When all items have been sent successfully, click Close.

Contact Dell Technical Support Services

Contact Dell Technical Support Services to let them know that you will be performing a

repair, and request that they suspend alerts for the enclosure. Ask Dell Technical Support

Services for a pre-installation system check.

Shut Down the Controller(s) and Enclosure(s)

If the FRU is not hot-swappable, use the Storage Center System Manager to shut down the

controller(s) and enclosure(s). Shutting down the controller(s) and enclosure(s) results in a

system outage, so plan to perform these procedures during a maintenance window.

1 Before shutting down the controller(s) and enclosure(s), make sure you identify the

failed part.

2 From the Storage Management menu, select System→ Shutdown/Restart. The

Shutdown/Restart dialog box appears.

3 Select Shutdown and click OK.

4 When the controller(s) and enclosure(s) are shut down, unplug the power cables from

the enclosure.

Replacing the Front Bezel

The front bezel is a cover for the front panel of the enclosure.

When replacing some FRUs, you may need to remove the front bezel. In these cases, the

replacement procedure in this document refers to these instructions.

1 Use the system key to unlock the keylock at the left end of the bezel.

2 Lift the release latch next to the keylock.

3 Rotate the left end of the bezel away from the front panel.

4 Unhook the right end of the bezel and pull the bezel away from the enclosure.

Dell Compellent