Dell Storage MD1400 series 관리자 매뉴얼 - 페이지 23

{카테고리_이름} Dell Storage MD1400 series에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Storage MD1400 series 48 페이지. Storage enclosure
Dell Storage MD1400 series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지), 시작하기 매뉴얼 (7 페이지)

페이지 인쇄

Command examples

•

list physical enclosures

•

list physical enclosures -a = 1

•

list physical enclosures -a = 500abcdefgh12345

List drives

Description

Shows the list of HDDs or SSDs and related information for the specified device. If no device is specified

to obtain drives for, all drives accessible by supported adapters in the local system are listed.

Command syntax

secli (list drives | listdrives | ld) ([-a=<(SAS WWID | AdapterIndex)>] [-

enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] [-

outputformat=<SupportedOutputFormats>] [-verbose] | -enc=<WWN> [-

w=<DrawerIndex>] [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])

Parameters

Table 8. List hard disk drive

Parameter

-a

-enc

-w

-h

-outputformat

Command examples

•

list drives

•

list drives -a = 1

•

list drives -a=1 -enc=0

•

list drives -a=1 -enc=0 -w=2 -verbose

•

list drives -enc=500a123456789012 - outputformat=xml

List EMMs

Description

This command lists the EMMs (Expansion Management Module) accessible from the specified adapter.

Description

Specify the adapter used for the command. This is

either SAS WWID or I.

Specify the enclosure used for the command. This

is either WWN or EnclIndex.

Specify the drawer index used for the command.

Provides more information about the command,

description, and usage.

You can specify the following output formats: xml

or json.