Dell Storage MD1400 series Yönetici El Kitabı - Sayfa 23
Depolama Dell Storage MD1400 series için çevrimiçi göz atın veya pdf Yönetici El Kitabı indirin. Dell Storage MD1400 series 48 sayfaları. Storage enclosure
Ayrıca Dell Storage MD1400 series için: Kullanıcı El Kitabı (37 sayfalar), Başlangıç Kılavuzu (7 sayfalar)
Sayfayı Yazdır
Command examples
•
list physical enclosures
•
list physical enclosures -a = 1
•
list physical enclosures -a = 500abcdefgh12345
List drives
Description
Shows the list of HDDs or SSDs and related information for the specified device. If no device is specified
to obtain drives for, all drives accessible by supported adapters in the local system are listed.
Command syntax
secli (list drives | listdrives | ld) ([-a=<(SAS WWID | AdapterIndex)>] [-
enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] [-
outputformat=<SupportedOutputFormats>] [-verbose] | -enc=<WWN> [-
w=<DrawerIndex>] [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])
Parameters
Table 8. List hard disk drive
Parameter
-a
-enc
-w
-h
-outputformat
Command examples
•
list drives
•
list drives -a = 1
•
list drives -a=1 -enc=0
•
list drives -a=1 -enc=0 -w=2 -verbose
•
list drives -enc=500a123456789012 - outputformat=xml
List EMMs
Description
This command lists the EMMs (Expansion Management Module) accessible from the specified adapter.
Description
Specify the adapter used for the command. This is
either SAS WWID or I.
Specify the enclosure used for the command. This
is either WWN or EnclIndex.
Specify the drawer index used for the command.
Provides more information about the command,
description, and usage.
You can specify the following output formats: xml
or json.
23