Dell VxRail E660 설치 및 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Dell VxRail E660에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VxRail E660 32 페이지.
Dell VxRail E660에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (32 페이지)

You can manage basic settings and features of the VxRail without booting into the operating system by using the system

firmware.

Dell Technologies optimizes your VxRail with the settings during installation and configuration.

CAUTION:

Do not change any basic settings or features set by Dell Technologies to ensure best performance.

VxRail contains options to manage the pre-operating system applications.

The following options are available:

● System Setup

● Boot Manager

● Dell Lifecycle Controller

● Preboot Execution Environment (PXE)

Your VxRail was optimized by Dell Technologies during the initial configuration.

NOTE:

Do not change any of the basic settings or features set by Dell Technologies to ensure best performance.

The Integrated Dell Remote Access Controller (iDRAC) is designed to make appliance administrators more productive and

improve the overall availability of Dell appliances. iDRAC alerts administrators to appliance issues, helps them perform remote

appliance management, and reduces the need for physical access to the appliance.

You can log in to iDRAC as the following users:

● iDRAC user

● Microsoft Active Directory user

● LDAP user

If secure default access to iDRAC is used, the iDRAC secure default password is available on the back of the appliance

Information tag. If you have not opted for secure default access to iDRAC, then the default user name and password are root

and calvin. You can also log in by using Dell SSO or Smart Card.

The following prerequisites are a must to log in to iDRAC:

● You must have iDRAC credentials.

● Ensure that you change the default user name and password after setting up the iDRAC IP address.

The iDRAC IP address is pre-configured for DHCP. This can be changed to a static IP address by logging into iDRAC.

● To access iDRAC, connect the network cable to the Ethernet connector 1 on the system board.

● Ensure that you change the default username and password after setting up the iDRAC IP address.

Pre-operating system management

applications

Pre-operating system management applications