Dell D18M 소유자 매뉴얼 - 페이지 20
{카테고리_이름} Dell D18M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell D18M 45 페이지. Remote power switch
Dell D18M에 대해서도 마찬가지입니다: 설정 및 사양 (39 페이지), 설정 및 사양 매뉴얼 (39 페이지), 설치 매뉴얼 (11 페이지)
Installing the heat sink assembly
1
Place the heat sink assembly on the processor.
2
Tighten the captive screws to secure the heat sink assembly to the system board.
3
Connect the heat sink assembly cable to the connector on the system board.
4
Close the front bezel door.
5
Install the:
•
bezel
•
cover
6
Follow the procedure in
Removing the processor
1
Follow the procedure in
2
Remove the:
•
cover
•
bezel
3
Open the
front bezel
4
Remove the
heat sink
5
To remove the processor:
a
Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
c Lift the processor out of the socket [3].
CAUTION:
the pins in the processor socket when removing the processor out of the socket.
After Working Inside Your
Before Working Inside Your
door.
assembly.
The processor socket pins are fragile and can be permanently damaged. Be careful not to bend
Computer.
Computer.
Removing and installing components
20