Dell D18M Instrukcja obsługi - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik Dell D18M. Dell D18M 45 stron. Remote power switch
Również dla Dell D18M: Konfiguracja i specyfikacja (39 strony), Instrukcja konfiguracji i specyfikacji (39 strony), Instrukcja instalacji (11 strony)
Drukuj stronę
Installing the heat sink assembly
1
Place the heat sink assembly on the processor.
2
Tighten the captive screws to secure the heat sink assembly to the system board.
3
Connect the heat sink assembly cable to the connector on the system board.
4
Close the front bezel door.
5
Install the:
•
bezel
•
cover
6
Follow the procedure in
Removing the processor
1
Follow the procedure in
2
Remove the:
•
cover
•
bezel
3
Open the
front bezel
4
Remove the
heat sink
5
To remove the processor:
a
Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
c Lift the processor out of the socket [3].
CAUTION:
the pins in the processor socket when removing the processor out of the socket.
After Working Inside Your
Before Working Inside Your
door.
assembly.
The processor socket pins are fragile and can be permanently damaged. Be careful not to bend
Computer.
Computer.
Removing and installing components
20