Dell EMC Edge 510 LTE 설치 매뉴얼 - 페이지 13

{카테고리_이름} Dell EMC Edge 510 LTE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC Edge 510 LTE 24 페이지. Networking switch
Dell EMC Edge 510 LTE에 대해서도 마찬가지입니다: 설정 매뉴얼 (8 페이지)

페이지 인쇄
Dell EMC Edge 510 LTE 설치 매뉴얼
WARNING:
When mounting the platform to the wall, face the Ethernet ports up towards the ceiling and the
system status LED panel down, facing the floor.
Keyhole-shaped bracket installation

Rack mount

As an option, you can mount the Edge 510 LTE platform to a dual rackmount tray. Purchase the dual rackmount tray separately.
You must have a torque screwdriver to complete this installation.
NOTE:
Verify that you torque to 5 lb-in when driving the screws into the bracket and platform.
NOTE:
Remove the rubber feet from the bottom of the platform when mounting on a rack mount tray.
NOTE:
Ensure that the platform is in a well-ventilated environment with clearance around the air vents.
1. Place one or two Edge 510 LTE platforms in the dual rackmount tray.
Edge 510 LTE installation
13