Dell Force10 MXL Blade 시작하기 매뉴얼 - 페이지 8

{카테고리_이름} Dell Force10 MXL Blade에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 MXL Blade 38 페이지. 10/40gbe blade switches
Dell Force10 MXL Blade에 대해서도 마찬가지입니다: 애플리케이션 노트 (6 페이지), 사양 (2 페이지), 매뉴얼 (27 페이지)

페이지 인쇄

Then save the configuration and reload the switch.

FTOS# write memory

FTOS# reload

Figure 1-2. MXL 10/40GbE Switch: Plug-in Modules

4-Port 10GbE SFP+ Module

4-Port 10GBASE-T Module (100Mb/1GbE/10GbE)

NOTE:

You can only hot-swap plug-in modules of the same type without requiring a

reboot. For example, you can replace a 2-Port 40GbE QSFP+ module only with

another 2-Port 40GbE QSFP+ module.

On the MXL 10/40GbE Switch, you can configure uplink ports of the same

speed on different modules in the same link aggregation group (LAG). You

can also use individual ports for uplink connections.

NOTE:

A maximum of 16 ports are supported in a LAG.

For switch stacking, you must use a 40GbE port on the base module or on a

2-Port 40GbE QSFP+ plug-in module. Stacking is not supported on 10GbE

ports.

All FlexIO plug-in modules, transceivers, and attach cables are sold separately.

Hardware Overview

2-Port 40GbE QSFP+ Module