Dell Force10 MXL Blade 시작하기 매뉴얼 - 페이지 9
{카테고리_이름} Dell Force10 MXL Blade에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 MXL Blade 38 페이지. 10/40gbe blade switches
Dell Force10 MXL Blade에 대해서도 마찬가지입니다: 애플리케이션 노트 (6 페이지), 사양 (2 페이지), 매뉴얼 (27 페이지)
페이지 인쇄
Port Numbering
When installed in a PowerEdge M1000e Enclosure, the MXL 10/40GbE
Switch ports are numbered 33 to 56 from the bottom to the top of the switch:
•
40GbE base-module ports:
•
In 40GbE mode of operation, the ports are numbered 33 and 37.
•
In 4x10GbE mode of operation, the ports are numbered 33 to 36
and 37 to 40.
For information about how to change a 40GbE port to 4x10GbE mode,
refer to "Splitting 40GbE QSFP+ Ports into 10GbE SFP+ Ports" on
page 30.
•
2-Port 40-GbE QSFP+ module operating in the default 4x10GbE mode:
•
In expansion slot 0, the ports are numbered 41 to 44 and 45 to 48.
•
In expansion slot 1, the ports are numbered 49 to 52 and 53 to 56.
For information about how to change a port from 4x10GbE to 40GbE
mode of operation, refer to "FlexIOTM Plug-in Modules" on page 7.
•
2-Port 40-GbE QSFP+ module operating in 40GbE mode:
•
In expansion slot 0, the ports are numbered 41 and 45.
•
In expansion slot 1, the ports are numbered 49 and 53.
•
4-Port 10-GbE SFP+ or 10GBASE-T module:
•
In expansion slot 0, the ports are numbered 41 to 44.
•
In expansion slot 1, the ports are numbered 49 to 52.
Hardware Overview
9