Dell Force10 S4820T System 시작하기 매뉴얼 - 페이지 9

{카테고리_이름} Dell Force10 S4820T System에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 S4820T System 39 페이지.

Introduction

This document provides basic information about the S4820T switch,

including how to install the switch and perform the initial configuration. For

information about how to configure and monitor switch features, refer to the

User's Configuration Guide, which is available on the Dell Support website at

support.dell.com/support.

This document contains the following sections:

Hardware Overview

•

Installation

•

Technical Specifications

•

Performing the Initial Configuration

S4820T is a top-of-rack (ToR) switch/router product for copper connections to

10G servers and 40Gbps uplinks to the 40G switching fabric in the core. The

S4820T has 48 ports of 10GBase-T and four ports of 40Gbps with features and

functions similar to the S4810 product.

The S4820T switch runs the Dell Force10 Operating System (FTOS), providing

switching, bridging, and routing functionality for transmitting data, storage, and

server traffic.

In a data center network, the S4820T switch provides converged network

support and interoperates with Dell and third-party ToR devices. The switch

supports data center bridging (DCB) features and optimizes connectivity

between servers and storage devices using Fibre Channel over Ethernet

(FCoE) and Internet Small Computer System Interface (iSCSI) links.

By providing increased 40GbE bandwidth for device interconnection in a

shared network storage environment, with the possibility of splitting 40GbE

Quad Small Form-Factor Pluggable Plus (QSFP+) uplinks into 10GbE SFP+

connections, the S4820T switch is perfectly positioned to help transition a

data center with multiple speed requirements.

Introduction