Dell Force10 S60 Series 매뉴얼 - 페이지 38

{카테고리_이름} Dell Force10 S60 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 S60 Series 45 페이지.
Dell Force10 S60 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (29 페이지)

페이지 인쇄

Step

Task (continued)

Remove the card.

Battery Replacement and Recycling

CAUTION: The lithium battery is not field replaceable. Only authorized personnel should remove and replace

the lithium battery. If the battery requires replacement, contact Dell Networking Technical Support.

WARNING: ESD damage can occur if the components are mishandled. Always wear an ESD-preventive

wrist or heel ground strap when handling the S60 system and its components. As with all electrical devices,

take all the necessary safety precautions to prevent injury when installing this system.

To remove the battery, follow these steps:

Step

Task

Remove the small Phillips screws that connect the top to the body. There are three evenly spaced screws across

the rear and three evenly spaced screws along each side.

Slide the top backwards until its front flange slides free of the faceplate. Lift it off.

Insert a small, flat screw driver blade under the battery and in one of the slots of the plastic retainer underneath the

battery.

S60 Specifications