Dell Force10 S60 Series Manuel - Sayfa 38

Anahtar Dell Force10 S60 Series için çevrimiçi göz atın veya pdf Manuel indirin. Dell Force10 S60 Series 45 sayfaları.
Ayrıca Dell Force10 S60 Series için: Hızlı Başlangıç Kılavuzu (29 sayfalar)

Sayfayı Yazdır

Step

Task (continued)

Remove the card.

Battery Replacement and Recycling

CAUTION: The lithium battery is not field replaceable. Only authorized personnel should remove and replace

the lithium battery. If the battery requires replacement, contact Dell Networking Technical Support.

WARNING: ESD damage can occur if the components are mishandled. Always wear an ESD-preventive

wrist or heel ground strap when handling the S60 system and its components. As with all electrical devices,

take all the necessary safety precautions to prevent injury when installing this system.

To remove the battery, follow these steps:

Step

Task

Remove the small Phillips screws that connect the top to the body. There are three evenly spaced screws across

the rear and three evenly spaced screws along each side.

Slide the top backwards until its front flange slides free of the faceplate. Lift it off.

Insert a small, flat screw driver blade under the battery and in one of the slots of the plastic retainer underneath the

battery.

S60 Specifications