Dell MXG610s 설정 매뉴얼 - 페이지 5
{카테고리_이름} Dell MXG610s에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell MXG610s 17 페이지. Fibre channel switch module
Dell MXG610s에 대해서도 마찬가지입니다: 설정 매뉴얼 (13 페이지)
페이지 인쇄Topics:
•
Blade server preparation
•
Switch module installation
•
Serial connection
•
Static IP addresses
•
Optical transceivers and cabling installation
•
Port-side LEDs
•
Additional country-specific IEEE notices
Blade server preparation
Before you insert the switch module in the blade server chassis, meet the following
conditions:
•
The blade server is powered up.
•
The blade server chassis meets all its specific power requirements.
•
The I/O module bay C1 or C2 is empty and ready to receive the switch module.
•
If you are replacing an existing switch module, to maintain the proper cooling level in the
chassis, insert the replacement switch module within one minute.
Switch module installation
Insert the switch modules in the blade server chassis slots and check that the modules are
functioning properly.
MXG610s Setup Guide
MXG610s Setup Guide
2
5