Dell MXG610s 설정 매뉴얼 - 페이지 12

{카테고리_이름} Dell MXG610s에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell MXG610s 17 페이지. Fibre channel switch module
Dell MXG610s에 대해서도 마찬가지입니다: 설정 매뉴얼 (13 페이지)

페이지 인쇄

Figure 9. Monitoring settings

Click and expand the Advanced Settings option. Select the needed check boxes.

Figure 10. Advanced settings

Click Apply.

You have configured the IP address and other settings for the switch module.

Optical transceivers and cabling installation

NOTE:

When cabling SFP+ optical transceivers, start from port 0, then port 17, and

then the other ports.

To insert the optical transceivers and the cable connections:

Insert the optical transceiver in an external port on the switch module until it is firmly

seated and the latching mechanism clicks.

Transceivers are keyed to ensure correct orientation. If a transceiver does not install

easily, ensure that it is correctly oriented.

Insert the fiber optic cable in the SFP+ or QSFP optical transceiver until the latching

mechanism clicks.

Cable connectors are keyed to ensure correct orientation. If a cable connector does not

install easily, ensure that it is correctly oriented.

MXG610s Setup Guide