Dell MXG610s Setup Manual - Halaman 12

Jelajahi secara online atau unduh pdf Setup Manual untuk Beralih Dell MXG610s. Dell MXG610s 17 halaman. Fibre channel switch module
Juga untuk Dell MXG610s: Setup Manual (13 halaman)

Halaman Cetak

Figure 9. Monitoring settings

Click and expand the Advanced Settings option. Select the needed check boxes.

Figure 10. Advanced settings

Click Apply.

You have configured the IP address and other settings for the switch module.

Optical transceivers and cabling installation

NOTE:

When cabling SFP+ optical transceivers, start from port 0, then port 17, and

then the other ports.

To insert the optical transceivers and the cable connections:

Insert the optical transceiver in an external port on the switch module until it is firmly

seated and the latching mechanism clicks.

Transceivers are keyed to ensure correct orientation. If a transceiver does not install

easily, ensure that it is correctly oriented.

Insert the fiber optic cable in the SFP+ or QSFP optical transceiver until the latching

mechanism clicks.

Cable connectors are keyed to ensure correct orientation. If a cable connector does not

install easily, ensure that it is correctly oriented.

MXG610s Setup Guide