Dell MXG610s Setup Manual - Halaman 14

Jelajahi secara online atau unduh pdf Setup Manual untuk Beralih Dell MXG610s. Dell MXG610s 17 halaman. Fibre channel switch module
Juga untuk Dell MXG610s: Setup Manual (13 halaman)

Halaman Cetak
LED
FC port status LED

Additional country-specific IEEE notices

Figure 12. Croatia
14
MXG610s Setup Guide
Description
•
Blinking blue—Module is being
identified.
•
Both off—No light or signal carrier—no
module, no cable—for the media
interface
•
Solid amber—Receiving light or signal
carrier, but not yet online
•
Slow flashing amber, 2-second intervals
—Disabled; results of diagnostics or the
portdisable command.
•
Fast flashing amber, 1/2-second
intervals—Error occurred, fault with
port.
•
Solid green—Online; connected with
external device over cable
•
Slow flashing green, 2-second intervals
—Online but segmented; Loopback
cable or incompatible switch.
•
Fast flashing green, 1/2-second intervals
—Internal loopback, diagnostic.
•
Flickering green—Online and frames
flowing through the port.