Dell MXG610s Setup Manual - Halaman 13

Jelajahi secara online atau unduh pdf Setup Manual untuk Beralih Dell MXG610s. Dell MXG610s 17 halaman. Fibre channel switch module
Juga untuk Dell MXG610s: Setup Manual (13 halaman)

Halaman Cetak
For instructions specific to a cable type, see the cable manufacturer's documentation.

Port-side LEDs

Each switch module uses bicolored external LEDs to indicate operation status. After you
install the switch module in a blade server chassis I/O module, the LEDs become active.
Figure 11. Switch module front panel LEDs
1
FC port 0 status LED
3
FC port 24 status LED
5
Module identification LED
Table 1. Port-side LEDs
LED
Module power and status LED
Module identification LED
2
FC port 17 status LED
4
Module power status LED
Description
•
Solid green—The switch is working
correctly.
•
Blinking amber—The switch is working
incorrectly. The temperature may be too
high, a software error has occurred, or
another error is discovered.
•
Off—There is no power supplied to the
FC switch module. Reseat the module
and ensure that the chassis power is on
and it has adequate power for the I/O
module.
•
Off—Module is not identified.
MXG610s Setup Guide
13