3 Day Blinds METAL BLINDS Deluxe 매뉴얼 - 페이지 6

{카테고리_이름} 3 Day Blinds METAL BLINDS Deluxe에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3 Day Blinds METAL BLINDS Deluxe 6 페이지.

BLIND OPERATION

To lower the blind, pull the lift cords down and toward the

center of the blind and allow the cords to slide slowly through

your hand.

To tilt the slats, twist the tilt wand.

Do not attempt to raise or lower the blind unless the slats are

in a completely open (horizontal) position.

To raise the blind, pull the lift cords down.

To engage the lock, pull the lift cords down and toward the

outside of the blind.

BLIND REMOVAL

Draw the blind completely up.

| 1" Metal Blinds Deluxe

• Push the headrail back

toward the wall or window

casing to release the back

of the headrail from the

mounting bracket hooks.

• Rotate the back of the

headrail down and carefully

lift the headrail off of the

front hooks of the mounting

brackets.

WARNING

Young children can STRANGLE in cord and bead chain loops.

They can also wrap cords around their necks and STRANGLE.

• Always keep cords and bead chains out of children's reach.

• Move cribs, playpens, and other furniture away from cords

and bead chains. Children can climb furniture to get to cords.

• Do not tie cords together. Make sure cords do not twist

together and create a loop.

Inner cords can pull out to form a loop, which can strangle a

young child.

• Inner cord stop devices can reduce this risk if positioned

correctly on the pull cords.

• If inner cord stop devices are more than 3 in (76 mm) below

the headrail when the blind is fully lowered, move them

closer by following the inner cord stop device adjustment

instructions.

800-800-3329 | 3dayblinds.com

ANSI/WMCA A100.1-2012 5.2.1

3˝ or less

ANSI/WMCA A100.1-2012 5.3.1.1