Dell Networking S4810 시작하기 매뉴얼 - 페이지 11

{카테고리_이름} Dell Networking S4810에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking S4810 16 페이지. Open networking
Dell Networking S4810에 대해서도 마찬가지입니다: 사양 (2 페이지), 구성 매뉴얼 (17 페이지), 설치 매뉴얼 (42 페이지), 구성 매뉴얼 (17 페이지)

페이지 인쇄
Dell Networking S4810 시작하기 매뉴얼

Installing AC Power Supplies

1.
Remove the PSU from the electro-static bag.
2.
Use the grab handle to slide the PSU into the switch PSU slot.
Figure 4. Install the AC Power Supply Unit
3.
Tighten the securing screws on the PSU.
4.
Attach the power cables.
NOTE: The system is powered-up as soon as you connect the power cord between the system
and the power source.
5.
Repeat steps 1 through 4 for the second PSU.
NOTE: Ensure that the PSU is correctly installed. When you correctly install the PSU, the power
connector is on the left side of the PSU.

Installing a Fan Module

1.
Remove the fan module from the shipping box.
2.
Use the grab handle to slide the module into the switch fan slot.
3.
Tighten the securing screws on the fan module.
CAUTION: DO NOT mix airflow directions. Both fans must use the same airflow direction (I/O to
Utility or Utility to I/O).
Install the Hardware
11